5 thoughts on “How to make the steps of paper lanterns”
Ana
1. Prepare red rectangular cardboard, and draw the above lines with the help of the ruler. Pay attention to leave empty on both sides. 2. Use a knife to open the line in the middle and fold the upper and lower sides. 3. Roll up the card paper and paste it with double -sided adhesive, and get the shape of the lantern. 4. Take the yellow card note and decorate the edge of the upper and lower puppets of the lantern, and use the red card paper to make a suspension device. 5. Take a long square yellow cardboard, cut the tassel, and roll it up to make the spikes and paste the bottom of the lantern.
1. First prepare a piece of paper with a size of 1: 1, fold the paper, and fold the other side on the other side after disassembling. Draw two positive circles and cut it on it. 2. Draw a point in the center after the traces of the positive circle horizontal and vertical, and fold it in the center point along the edge's opposite line. 3. Use double -sided glue to stick the folding positive circle together. Each group of five groups is made into three groups in total, sticking the edges together to form a cylindrical body, and the sticky objects are connected again. 4. Take a rope through the middle, then cut a piece of paper from two -fifth, use scissors abbreviated strips, take a rope, and knot on one end. 5. Paste the double -sided glue in the blank space, roll the rope up and stick, and the other end of the rope pastes through the middle of the previous one to kill the knot. It is done together.
Pay content for time limit to check for freenAnswer hello, first prepare the color paper that needs to be used, cut red color paper to cut into a long square shape, paste the glue stick into a cylindrical yellow color paper and cut the growth strip to stick the cut yellow color paper with the cylindrical column, the other small small small small small columns, the other small small small small small small column Correctly cut into round yellow color paper for cutting, as a lamp ear to stick the cut color paper on the cylindrical, and then use red color paper to make the lanterns and paste the handle to the top of the cylinder, and it is ready.
Materials required: cardboard, stopper knife, straight ruler, pencil, double -sided glue, line rope. Production steps: 1, prepare a rectangular red card paper; 2, leave 0.5 to 1 cm on each side of the cardboard, divide several parallel lines according to the equal division, cut it with a stopper knife, cut it with a stopper knife. ; 3, roll the card paper arc; 4, pair of stickers;
1. Use a straight ruler to leave 0.5 ~ 1.0cm on each side of the recycling paper paper, and the middle part is planned at a distance of several parallel lines at a distance distance. Then use a beautiful worker knife to open the vertical parallel line of the cardboard one by one.
2. Slightly pressing the upper and lower sides of the cardboard to press the middle to make the middle part of the force arched. 3. Roll up the card paper. The parallel line that was opened before will be automatically rolled into a protruding apartment, forming the outline of the large belly lanterns
4, the left and right sides with double -sided glue or Paste the glue; remove the rope from the waste shopping bag or gift bag and cut it into thin strips, and then stick it with the line.
1. Prepare red rectangular cardboard, and draw the above lines with the help of the ruler. Pay attention to leave empty on both sides.
2. Use a knife to open the line in the middle and fold the upper and lower sides.
3. Roll up the card paper and paste it with double -sided adhesive, and get the shape of the lantern.
4. Take the yellow card note and decorate the edge of the upper and lower puppets of the lantern, and use the red card paper to make a suspension device.
5. Take a long square yellow cardboard, cut the tassel, and roll it up to make the spikes and paste the bottom of the lantern.
1. First prepare a piece of paper with a size of 1: 1, fold the paper, and fold the other side on the other side after disassembling. Draw two positive circles and cut it on it.
2. Draw a point in the center after the traces of the positive circle horizontal and vertical, and fold it in the center point along the edge's opposite line.
3. Use double -sided glue to stick the folding positive circle together. Each group of five groups is made into three groups in total, sticking the edges together to form a cylindrical body, and the sticky objects are connected again.
4. Take a rope through the middle, then cut a piece of paper from two -fifth, use scissors abbreviated strips, take a rope, and knot on one end.
5. Paste the double -sided glue in the blank space, roll the rope up and stick, and the other end of the rope pastes through the middle of the previous one to kill the knot. It is done together.
Pay content for time limit to check for freenAnswer hello, first prepare the color paper that needs to be used, cut red color paper to cut into a long square shape, paste the glue stick into a cylindrical yellow color paper and cut the growth strip to stick the cut yellow color paper with the cylindrical column, the other small small small small small columns, the other small small small small small small column Correctly cut into round yellow color paper for cutting, as a lamp ear to stick the cut color paper on the cylindrical, and then use red color paper to make the lanterns and paste the handle to the top of the cylinder, and it is ready.
Materials required: cardboard, stopper knife, straight ruler, pencil, double -sided glue, line rope. Production steps:
1, prepare a rectangular red card paper;
2, leave 0.5 to 1 cm on each side of the cardboard, divide several parallel lines according to the equal division, cut it with a stopper knife, cut it with a stopper knife. ;
3, roll the card paper arc;
4, pair of stickers;
1. Use a straight ruler to leave 0.5 ~ 1.0cm on each side of the recycling paper paper, and the middle part is planned at a distance of several parallel lines at a distance distance. Then use a beautiful worker knife to open the vertical parallel line of the cardboard one by one.
2. Slightly pressing the upper and lower sides of the cardboard to press the middle to make the middle part of the force arched.
3. Roll up the card paper. The parallel line that was opened before will be automatically rolled into a protruding apartment, forming the outline of the large belly lanterns
4, the left and right sides with double -sided glue or Paste the glue; remove the rope from the waste shopping bag or gift bag and cut it into thin strips, and then stick it with the line.
completed.