1 thought on “What are the tools for making golden flower silk jewelry?”
Nicholas
Because the flowers and inlaid are two processes, they belong to different rows, and the filament also divides the wire pull -up process into a workshop separately. Before each time I do it, let people pull the wire. Blocking, rubbing into strips, then put it in the eyes of the silk, and after counting countless times, the silk of the flower workshop is thinner than the hair. After taking the silk, it is made of filaments. Generally, according to the requirements of guests, use scissors, hammers, tweezers, and swords to use tools such as silk, bow silk, tiles, braids, filled with silk heads (filling the pattern) and so on Planting technology to do flowers. Among them, the most complicated is the seamless welding of gold and silver wire. Because the only source of the fire was kerosene lamp at that time, Master Flower had to bake the silk on the fire while blowing the wire with a higher temperature at the interface of the filament. Even if you do a simple job, it takes a day, and because he keeps blowing during welding, the master who has just finished the work is always dizzy.
The flower silk inlaid with flowers is different from the grades, and the silk used is also divided into silver and golden silk. Basic preparations start with strip -shaped gold and silver into filament. Hand -drawing is a tradition that has continued for hundreds of years, also known as pulling silk. The dedicated drawing tool is called drawing plate, with 40 to 50 different diameter eye holes arranged from thick to fine, with the smallest thin hair. In the process of pulling the coarse silk, the thick silk must be passed through each eye hole from large to small, and cannot be skipped. Sometimes, if you want to pull the required filaments, you must go through a dozen times. The brushes are relying on the strength of the hand, so almost all of them are done by men.
The drawing board is a dedicated drawing tool, with 40 or fifty different diameter eye holes arranged from thick to fine. Eye holes are generally made of alloys and diamonds, with the smallest thin hair. In the process of pulling the thick silk, it must be large to small through each eye hole and cannot be skipped. Sometimes it is necessary to get the required filament after a dozen tensors. The surface of the silver silk that was originally pulled was rough, and it took a lot of effort. It gradually became smooth after several pull -ups.
The single silk pulled out of the drawing board is only "Su Si". The surface of the plain silk is smooth, and it must be used for a certain amount of processing. It can be used as a variety of filaments with patterns. The style of the plain silk is more complicated, including arch line, bamboo silk, screws, codes, wheat ears, phoenix silk, twist silk, small braid silk and other total. In creation.
It the filament of the finished flower, if you still need to inlaid jewelry, there are special persons to send them to the nearby jewelry building for mosaic masters to inlaid on it. , Burning blue and other techniques. Filament inlaid can be pondered for a lifetime.
The production method of flower silk process can usually be summarized as eight words "pile, barrier, editing, weaving, 掐, filling, storing, welding, and welding". (1) Packing. The carcass piled up with white cricket and carbon powder, burned into ashes with fire, and left the hollowed -out filament and empty tire. Specific processes include 5 aspects: 1. Use charcoal powder and white pupa to add water to mud, make the carcass; 2. Putting various flowers or plain filaments into the required pattern; 3. Use the filament pattern to be made into the pattern of the filament. White cymbals are sticking to the carcass; 4. Place welding medicine according to the density of the sticky patterns; 5. Repair, welding the pattern of the pattern with the welding pattern without welding patterns. (2) Base. The combination of filament -like patterns above the two layers is called the base. The technique of the barrier can be divided into two types: 1. Sticking the filament patterns of the flower on the real tire, and then welding; 2. During the production process of the component, the pattern is separated by separate patterns. (3) edit. Use one or more different types of flowers or plain silk to make patterns according to the latitude and weft line. The specific process is divided into the following three parts: 1. Rolling; 2. Burning the wire rolled over the fire and softening to woven; (4) Weaving. It is a single -stranded flower wire according to the principle of latitude and longitude, and the pattern is made of fine gauze through single silk. (5) . Use iron dumplings to make flowers or plain silk into various patterns. Including four processes of filament, broken wire, stub, and grit. (6) Fill. Fill the rolled single -strands or plain wire in the outline of the stubborn pattern. (7) . The separate patterns that are made in different methods are assembled into the more complex patterns required, and these complex patterns are assembled on the tire type. (8) welding. Welding is the most basic technique of the filament process, accompanied by every process of the filament process.
Because the flowers and inlaid are two processes, they belong to different rows, and the filament also divides the wire pull -up process into a workshop separately. Before each time I do it, let people pull the wire. Blocking, rubbing into strips, then put it in the eyes of the silk, and after counting countless times, the silk of the flower workshop is thinner than the hair. After taking the silk, it is made of filaments. Generally, according to the requirements of guests, use scissors, hammers, tweezers, and swords to use tools such as silk, bow silk, tiles, braids, filled with silk heads (filling the pattern) and so on Planting technology to do flowers. Among them, the most complicated is the seamless welding of gold and silver wire. Because the only source of the fire was kerosene lamp at that time, Master Flower had to bake the silk on the fire while blowing the wire with a higher temperature at the interface of the filament. Even if you do a simple job, it takes a day, and because he keeps blowing during welding, the master who has just finished the work is always dizzy.
The flower silk inlaid with flowers is different from the grades, and the silk used is also divided into silver and golden silk. Basic preparations start with strip -shaped gold and silver into filament. Hand -drawing is a tradition that has continued for hundreds of years, also known as pulling silk. The dedicated drawing tool is called drawing plate, with 40 to 50 different diameter eye holes arranged from thick to fine, with the smallest thin hair. In the process of pulling the coarse silk, the thick silk must be passed through each eye hole from large to small, and cannot be skipped. Sometimes, if you want to pull the required filaments, you must go through a dozen times. The brushes are relying on the strength of the hand, so almost all of them are done by men.
The drawing board is a dedicated drawing tool, with 40 or fifty different diameter eye holes arranged from thick to fine. Eye holes are generally made of alloys and diamonds, with the smallest thin hair. In the process of pulling the thick silk, it must be large to small through each eye hole and cannot be skipped. Sometimes it is necessary to get the required filament after a dozen tensors. The surface of the silver silk that was originally pulled was rough, and it took a lot of effort. It gradually became smooth after several pull -ups.
The single silk pulled out of the drawing board is only "Su Si". The surface of the plain silk is smooth, and it must be used for a certain amount of processing. It can be used as a variety of filaments with patterns. The style of the plain silk is more complicated, including arch line, bamboo silk, screws, codes, wheat ears, phoenix silk, twist silk, small braid silk and other total. In creation.
It the filament of the finished flower, if you still need to inlaid jewelry, there are special persons to send them to the nearby jewelry building for mosaic masters to inlaid on it. , Burning blue and other techniques. Filament inlaid can be pondered for a lifetime.
The production method of flower silk process can usually be summarized as eight words "pile, barrier, editing, weaving, 掐, filling, storing, welding, and welding".
(1) Packing. The carcass piled up with white cricket and carbon powder, burned into ashes with fire, and left the hollowed -out filament and empty tire. Specific processes include 5 aspects: 1. Use charcoal powder and white pupa to add water to mud, make the carcass; 2. Putting various flowers or plain filaments into the required pattern; 3. Use the filament pattern to be made into the pattern of the filament. White cymbals are sticking to the carcass; 4. Place welding medicine according to the density of the sticky patterns; 5. Repair, welding the pattern of the pattern with the welding pattern without welding patterns.
(2) Base. The combination of filament -like patterns above the two layers is called the base. The technique of the barrier can be divided into two types: 1. Sticking the filament patterns of the flower on the real tire, and then welding; 2. During the production process of the component, the pattern is separated by separate patterns.
(3) edit. Use one or more different types of flowers or plain silk to make patterns according to the latitude and weft line. The specific process is divided into the following three parts: 1. Rolling; 2. Burning the wire rolled over the fire and softening to woven;
(4) Weaving. It is a single -stranded flower wire according to the principle of latitude and longitude, and the pattern is made of fine gauze through single silk.
(5) . Use iron dumplings to make flowers or plain silk into various patterns. Including four processes of filament, broken wire, stub, and grit.
(6) Fill. Fill the rolled single -strands or plain wire in the outline of the stubborn pattern.
(7) . The separate patterns that are made in different methods are assembled into the more complex patterns required, and these complex patterns are assembled on the tire type.
(8) welding. Welding is the most basic technique of the filament process, accompanied by every process of the filament process.